Skip to content

(+62) 822-1515-1899

sales@elcoblast.com

Find Us On

  • LinkedIn
  • Instagram
  • TikTok
  • Facebook
  • YouTube
  • WhatsApp
Elcoblast Indonesia

Elcoblast Indonesia

  • HOME
  • Tentang Kami
    • Vision & Mission
    • Sambutan CEO
    • Awards
    • Career Info
    • Artikel
  • Blasting Equipment
  • Inspection Equipment
    • Coating Inspection
      • Inspection Kit
        • Digital Inspection
        • Blasting Inspection
        • Protective Coating Inspection
        • Coating On Concrete Inspection
        • Hazardous Area Inspection
        • Qualicoat & Powder Inspection
        • Surface Contamination
        • Soluble Salt & Ion Specific Inspection
        • Pinhole & Holiday Detection
        • HV & AV Duct Inspection kit
      • Surface Cleanliness & Profile
        • Surface Condition
        • Surface Cleanliness
        • Surface Profile
        • Surface Roughness
        • Blast Test Equipment
      • Moisture
      • RH, Dewpoint & Temp
        • Relative Humidity & Dewpoint
        • Temperature
        • Wind Speed
      • Wet Film & Powder Thickness
        • Wet Film Combs
        • Wet Film Wheels
        • Pfund Thickness Gauge
        • Powder Thickness Measurement
      • Dry Film Thickness
        • Digital
        • Mechanical
        • Destructive
        • Calibration Standard
      • Adhesion Tester
        • Pull Off Adhesion Tester
        • Push Off Adhesion Tester
        • Cross Hatch Adhesion Tester
        • Adhesion Verification Unit
      • Pinhole & Porosity
        • Wet Sponge
        • High Voltage DC
        • High Voltage Pulsed DC
        • UV Pinhole
    • NDT Inspection
      • Material Thickness
      • Precision Thickness
      • Bolt Tension
    • Appearance
      • Gloss & Reflectance
      • Distinctive of Image
      • Colour
  • Painting Equipment
    • Electric
    • Pneumatic
    • Line Stripes
    • Protective Coating Spray Equipment
    • Spray Foam Equipment
    • Painting Accessories
Home / Elcometer / Blast Equipment / Blast Hose. Nozzle Holders and Couplings / Blast Hose Assemblies / Blast Hose Assemblies 12bar (174psi) / Elcometer 11/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling
Elcometer 11/2" (38mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling

Elcometer 11/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling

Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 3⁄4″ (19mm) and are supplied with a nylon nozzle holder and a nylon quick coupling with either 1” contractor or 3⁄4″ fine threads. The following…

Category: Blast Equipment, Blast Hose Assemblies, Blast Hose Assemblies 12bar (174psi), Blast Hose. Nozzle Holders and Couplings, Elcometer
  • Description
  • Reviews (0)

Description

Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 3⁄4″ (19mm) and are supplied with a nylon nozzle holder and a nylon quick coupling with either 1” contractor or 3⁄4″ fine threads. The following Elcometer blast hose assemblies come complete with:

  • Blast Hose
  • Twinline Pneumatic Remote Control Hose
  • DMH II Deadman’s Handle
  • Nozzle Holder
  • Quick Coupling

Tough Outer Cover

Manufactured using abrasion resistant and anti-static natural and styrene-butadiene rubber with a cloth impression, the tough weather resistant cover prolongs the life of the hose.

Anti-Static and Abrasion Resistant Inner Wall

Elcometer blast hose is abrasion resistant and manufactured out of natural and styrene-butadiene rubber compound with carbon black, in accordance with DIN53516 and has an anti-static rating (R) of less than 106sq/m (10.767sq/ft) to protect the user from static build up.

2 Ply Braid Reinforcement

Elcometer’s blast hose features highly woven cord linings in a 2 ply cross pattern to improve hose strength and allow flexibility.

Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Nylon
Quick Coupling :Nylon
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 20m (65.6ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :20m (65.6ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Nylon
Quick Coupling :Nylon
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Aluminium
Quick Coupling :Cast Iron
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 20m (65.6ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :20m (65.6ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Aluminium
Quick Coupling :Cast Iron
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Nylon
Quick Coupling :Cast Iron
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 20m (65.6ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :20m (65.6ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Nylon
Quick Coupling :Cast Iron
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Aluminium
Quick Coupling :Nylon
Elcometer 1 1/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 20m (65.6ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :38mm (1 1/2″)
Thread Type :2″ (51mm) Contractor
Hose Length :20m (65.6ft)
Outside Diameter (OD) :56mm (2 3/16″)
Minimum Bend Radius :305mm (12 1/64″)
Nozzle Holder :Aluminium
Quick Coupling :Nylon

Reviews

There are no reviews yet.

Be the first to review “Elcometer 11/2″ (38mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling” Cancel reply

Your email address will not be published. Required fields are marked *

Related products

  • Elcometer MTG4
    Read more

    Elcometer MTG4 Material Thickness Gauge

  • Elcometer 266
    Read more

    Elcometer 266 DC Holiday Detector

  • Elcometer 270 Pinhole Detection
    Read more

    Elcometer 270 Pinhole Detector

  • Elcometer 510 dengan dolly
    Read more

    Elcometer 510 Automatic Pull-Off Adhesion Gauge

Elcoblast Indonesia

Elcoblast Indonesia

Mitra solusi industri untuk peralatan blasting, painting, inspeksi coating, dan material abrasif guna menghasilkan coating berkualitas dengan efisiensi operasional yang lebih baik.

  • LinkedIn
  • Instagram
  • TikTok
  • Facebook
  • YouTube
  • WhatsApp

Contact Us

sales@elcoblast.com

+(62) 822-1515-1899

Address : Jl.Dupak 65, Ruko Mutiara Dupak Blok B-19, Gundih, Kec.Bubutan, Surabaya, Jawa Timur 60172

Quick Links

  • Home
  • Tentang Kami
  • Services
  • Contact

Products & Solutions

Blasting Equipment

Painting Equipment

Inspection Equipment

Abrasive Materials

© 2026 PT Elcoblast Indonesia. Hak cipta dilindungi. Website menggunakan tema CozyThemes.

Notifications