Skip to content

(+62) 822-1515-1899

sales@elcoblast.com

Find Us On

  • LinkedIn
  • Instagram
  • TikTok
  • Facebook
  • YouTube
  • WhatsApp
Elcoblast Indonesia

Elcoblast Indonesia

  • HOME
  • Tentang Kami
    • Vision & Mission
    • Sambutan CEO
    • Awards
    • Career Info
    • Artikel
  • Blasting Equipment
  • Inspection Equipment
    • Coating Inspection
      • Inspection Kit
        • Digital Inspection
        • Blasting Inspection
        • Protective Coating Inspection
        • Coating On Concrete Inspection
        • Hazardous Area Inspection
        • Qualicoat & Powder Inspection
        • Surface Contamination
        • Soluble Salt & Ion Specific Inspection
        • Pinhole & Holiday Detection
        • HV & AV Duct Inspection kit
      • Surface Cleanliness & Profile
        • Surface Condition
        • Surface Cleanliness
        • Surface Profile
        • Surface Roughness
        • Blast Test Equipment
      • Moisture
      • RH, Dewpoint & Temp
        • Relative Humidity & Dewpoint
        • Temperature
        • Wind Speed
      • Wet Film & Powder Thickness
        • Wet Film Combs
        • Wet Film Wheels
        • Pfund Thickness Gauge
        • Powder Thickness Measurement
      • Dry Film Thickness
        • Digital
        • Mechanical
        • Destructive
        • Calibration Standard
      • Adhesion Tester
        • Pull Off Adhesion Tester
        • Push Off Adhesion Tester
        • Cross Hatch Adhesion Tester
        • Adhesion Verification Unit
      • Pinhole & Porosity
        • Wet Sponge
        • High Voltage DC
        • High Voltage Pulsed DC
        • UV Pinhole
    • NDT Inspection
      • Material Thickness
      • Precision Thickness
      • Bolt Tension
    • Appearance
      • Gloss & Reflectance
      • Distinctive of Image
      • Colour
  • Painting Equipment
    • Electric
    • Pneumatic
    • Line Stripes
    • Protective Coating Spray Equipment
    • Spray Foam Equipment
    • Painting Accessories
Home / Elcometer / Blast Equipment / Blast Hose. Nozzle Holders and Couplings / Blast Hose Assemblies / Blast Hose Assemblies 12bar (174psi) / Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling
Elcometer 1 1/4" (32mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling

Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling

Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 3⁄4″ (19mm) and are supplied with a nylon nozzle holder and a nylon quick coupling with either 1” contractor or 3⁄4″ fine threads. The following…

Category: Blast Equipment, Blast Hose Assemblies, Blast Hose Assemblies 12bar (174psi), Blast Hose. Nozzle Holders and Couplings, Elcometer
  • Description
  • Reviews (0)

Description

Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 3⁄4″ (19mm) and are supplied with a nylon nozzle holder and a nylon quick coupling with either 1” contractor or 3⁄4″ fine threads. The following Elcometer blast hose assemblies come complete with:

  • Blast Hose
  • Twinline Pneumatic Remote Control Hose
  • DMH II Deadman’s Handle
  • Nozzle Holder
  • Quick Coupling

Tough Outer Cover

Manufactured using abrasion resistant and anti-static natural and styrene-butadiene rubber with a cloth impression, the tough weather resistant cover prolongs the life of the hose.

Anti-Static and Abrasion Resistant Inner Wall

Elcometer blast hose is abrasion resistant and manufactured out of natural and styrene-butadiene rubber compound with carbon black, in accordance with DIN53516 and has an anti-static rating (R) of less than 106sq/m (10.767sq/ft) to protect the user from static build up.

2 Ply Braid Reinforcement

Elcometer’s blast hose features highly woven cord linings in a 2 ply cross pattern to improve hose strength and allow flexibility.

Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 5m (16.4ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :5m (16.4ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Nylon
Quick Coupling :Nylon
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Nylon
Quick Coupling :Nylon
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 5m (16.4ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :5m (16.4ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Aluminium
Quick Coupling :Cast Iron
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Aluminium
Quick Coupling :Cast Iron
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 5m (16.4ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :5m (16.4ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Nylon
Quick Coupling :Cast Iron
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Nylon
Quick Coupling :Cast Iron
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 5m (16.4ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :5m (16.4ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Aluminium
Quick Coupling :Nylon
Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Aluminium Nozzle Holder (Contractor Thread) & Nylon Quick Coupling – 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :32mm (1 1/4″)
Thread Type :2″ (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :48mm (1 7/8″)
Minimum Bend Radius :260mm (10 15/64″)
Nozzle Holder :Aluminium
Quick Coupling :Nylon

Reviews

There are no reviews yet.

Be the first to review “Elcometer 1 1/4″ (32mm) ID 12bar (174psi) Blast Hose Assembly with Nozzle Holder & Quick Coupling” Cancel reply

Your email address will not be published. Required fields are marked *

Related products

  • Elcometer 266
    Read more

    Elcometer 266 DC Holiday Detector

  • Elcometer 108 Hydraulic Adhesion Tester
    Read more

    Elcometer 108 Hydraulic Adhesion Testers

  • Elcometer 508 dengan dolly
    Read more

    Elcometer 508 Push Off Adhesion Tester

  • Coated Thickness Standards
    Read more

    Coated Thickness Standards

Elcoblast Indonesia

Elcoblast Indonesia

Mitra solusi industri untuk peralatan blasting, painting, inspeksi coating, dan material abrasif guna menghasilkan coating berkualitas dengan efisiensi operasional yang lebih baik.

  • LinkedIn
  • Instagram
  • TikTok
  • Facebook
  • YouTube
  • WhatsApp

Contact Us

sales@elcoblast.com

+(62) 822-1515-1899

Address : Jl.Dupak 65, Ruko Mutiara Dupak Blok B-19, Gundih, Kec.Bubutan, Surabaya, Jawa Timur 60172

Quick Links

  • Home
  • Tentang Kami
  • Services
  • Contact

Products & Solutions

Blasting Equipment

Painting Equipment

Inspection Equipment

Abrasive Materials

© 2026 PT Elcoblast Indonesia. Hak cipta dilindungi. Website menggunakan tema CozyThemes.

Notifications