Description
The blast nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes. The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.
 |
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2 Orifice Diameter :3.2mm (1/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :2 Number of Holes :1 |
 |
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2 Orifice Diameter :3.2mm (1/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :2 Number of Holes :2 |
 |
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2 Orifice Diameter :3.2mm (1/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :2 Number of Holes :3 |
 |
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3 Orifice Diameter :4.8mm (3/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :3 Number of Holes :1 |
 |
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3 Orifice Diameter :4.8mm (3/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :3 Number of Holes :2 |
 |
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3 Orifice Diameter :4.8mm (3/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :3 Number of Holes :3 |
 |
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4 Orifice Diameter :6.35mm (1/4″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :4 Number of Holes :1 |
 |
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4 Orifice Diameter :6.35mm (1/4″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :4 Number of Holes :2 |
 |
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4 Orifice Diameter :6.35mm (1/4″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :4 Number of Holes :3 |
 |
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5 Orifice Diameter :8mm (5/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :5 Number of Holes :1 |
 |
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5 Orifice Diameter :8mm (5/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :5 Number of Holes :2 |
 |
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5 Orifice Diameter :8mm (5/16″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :5 Number of Holes :3 |
 |
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6 Orifice Diameter :9.5mm (3/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :6 Number of Holes :1 |
 |
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6 Orifice Diameter :9.5mm (3/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :6 Number of Holes :2 |
 |
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6 Orifice Diameter :9.5mm (3/8″) Length :88mm (3.46″) Entry Diameter :25mm (0.98″) Thread Type :2″ (51mm) Contractor Nozzle Number :6 Number of Holes :3 |
Reviews
There are no reviews yet.